Filter
Top Products
Overview of measuring
To get the most accurate absolute values, measurements should be taken while wearing
no clothing, preferably in the evening, and after urinating. If you do not undress, always
remove your socks or stockings, and be sure the soles of your feet are clean before step-
ping on the measuring platform. Stand erect on the platform. If used after bathing, the
body must be completely dry.
NOTE: Accurate measurement will not be possible if the soles of your feet are not clean, or if
your knees are bent or you are in a sitting position.
It is best to take measurements at the same time each day, preferably in the evening. If
doing so is not convenient, remember to wait about three hours after rising, eating, or
hard exercise before taking measurements. While readings taken under other conditions
may not have the same absolute values, they are accurate for determining the percentage
of change as long as the readings are taken in a consistent manner. To monitor progress,
compare weight and body fat percentage measurements taken under the same conditions
over a period of time.
Setting and storing data in memory
The TBF-604 can be operated only if data has been pre-programmed. Once programmed,
tapping the appropriate PERSONAL key turns the monitor on. The unit has an automatic
shut-down function. If you do not step on the platform after pressing the PERSONAL
key, the unit will automatically shut off in about 30 seconds.
The TBF-604 is a Personal Model for male or female adults aged 18 or older.
The TBF-604 is not intended for use by persons involved in intense aerobic exercise of at least 10 hours
per week and who have a resting heart rate of less than 60 beats per minute. It is also not intended for
professional athletes or bodybuilders who may experience physical changes due to dehydration.
1. Turn on the power
When programming data, use the Blue Set button to turn the unit on. The numbers
(1 or 2) will appear and the display will flash.
2. Select Personal key
Use the Green Arrow button to select a PERSONAL key number for the person whose
measurement is to be taken. Then press the Set button.
3. Select Male or Female
Use the Arrow button to select the appropriate gender, then press the Set button.
( ) Male ( ) Female
4. Specify the height
Use the Arrow button to specify the height in feet and inches. Then press the Set button.
The display will flash all data (adult male or female and height) for 3 seconds to confirm
the programming. The power will automatically turn off.
How to measure body fat percentage
Turn the unit on.
Select gender. Install in memory.
Install in memory.Specify the height.
Confirmed data will flash for 3 seconds.
Install in memory.Select PERSONAL key.