Filter
Top Products
6
Setting (resetting) personal data in memory
The unit can be operated only if data has been programmed into one of the
personal data memories.
Place your scale on a flat, even floor.You will need to measure your
current weight during this process.
1. Turn on the power
Press SET button to turn on the unit. The unit will beep to confirm activation.
The personal key number will flash.
2. Select a personal key number
Press the Up / Down buttons to select a personal key number (1-2). Once
you reach the personal key number you wish to use, press the SET button.
The unit will beep once to confirm.
3. Specify the height
The display defaults to 5' 7" (170cm). Use Up / Down buttons to specify
height and then press the SET button. The unit will beep once to confirm.
NOTE: Height setting range is from 3' 4" – 7' 3" (100 cm – 220 cm)
4. Measuring weight
Make sure that the scale is placed on a flat, even floor.
When “0.0” displays, step on the platform. The result will be displayed and
will beep twice to confirm. You may then step off the scale.
NOTE: “Err” appears when the unit cannot accurately measure your weight
or it detects movement. The scale will automatically shut off after
20 seconds.
5. Select “Auto Goal Weight” or “Input Goal Weight”
The scale displays your “Auto Goal Weight.” You may press the SET button
to confirm. The unit will beep once to confirm. If you wish to change the goal
weight, use Up / Down buttons to set goal weight and then press the SET
button. The unit will beep once to confirm. “Input Goal Weight” icon will appear.
NOTE: “Input Goal Weight” setting range is ± 99 lb (± 50 kg) from the
current weight.
6. Select CLASSIC Mode or WEIGHTLESS Mode (See description below.)
The display defaults to Classic Mode. Use Up / Down buttons to select
Classic Mode or Weightless Mode and press the SET button.The unit will
beep twice to confirm and store the personal data. The scale will then
automatically shut off.
• Classic Mode will display your current weight in the center of the display.
• Weightless Mode will not display your current weight; instead your
“Since Start” weight and “Since Last” weight will flash alternately
in the center of the display.