Filter
Top Products
GB
GB
a
Do not continuously press button.
If you keep the button depressed, the data may be set
incorrectly.
SET
Remarks
3
Set the “Day”.
e. g. In the case of 10th
11
Use
UU
the calendar.
press again to finalize
While “PRESS SET” is
flashing on the screen,
U
U
4
Set the “Year”.
e. g. In the case of the 1999.
The calendar setting is finished.
(The finalized setting is
displayed and then disappears.)
5
Set the “Time”.
e. g. In the case of 2 p.m.
6
Set the “Minute”.
e. g. In the case of 35 minutes
7
Finalize the calendar.
Press
or
press
U
and finalize the
and set the “Day”.
Press
or
to make the clock flash.
U
U
Press
or
and set the “Time”.
* A.M. is displayed as “A” and
P.M. is displayed as “P.”
Press
or
and set the “Year”.
Press or
and set the
“Minute”. Press
setting.
(The display changes to
the time setting screen.)
press
U
and finalize the
setting.
(The display changes to
the time setting screen.)
Press
U
and finalize the
setting.
(The display changes to
the time setting screen.)
U
and
finalize the setting.
GB
GB
Following the instructions on
page 11, please place the
batteries correctly.
(The LCD will appear as here
(right), if the calender is not set.)
Points to Note
Automatic Power Off Function
a
In order to save power the unit will automatically
switch off after use. (The display disappears.)
The automatic power off function also works in the
following case.
©
When the button operations are stopped.
Although it depends on the operation concerned, the power
will be switched off after about 20 to 30 seconds.
a
If you have made a mistake during setting,
ePlease press the button.
This operation takes you back to the month setting,
then correct the setting.
a
When you want to change the calendar setting,
ePlease refer to the “How to Change the Calendar”
on page 21.
GRAPH
Set the calendar
This equipment has a function for memorizing measurement
results and displaying graphs.
In order to efficiently use this function please set the
calendar correctly.
2
Set the “Month”.
e.g.: In the case of August
Confirm that the dry cell
batteries are installed.
1
Before measuring
Calendar Setting
10
* The blue parts in the illustrations of the display signify the flashing parts.
Display
SET Button
UP Button
Time/DOWN Button
GRAPH Button
Press or
to make the calendar flash.
UU
Press or
Press or
UU
to make the “Month” flash.
set the “Month” and press
U
to finalize the “Month”.
(The next item to be set will flash.)
BF-562海外GB+D面付解除 ページ11