Filter
Top Products
GB
GB
19
©If you do not step on the scale within 30
seconds after [0.0] is displayed, the
power will switch off.
Automatic Power Off Function
aYou cannot record the measurement results.
e
T
o record the measurement results after
memorising personal data, please follow the
instructions specified in "How to Measure (For
Registered Individuals)" on page 16.
aIf body weight exceeds the measurement
range.
e
"OL OVER LOAD" or "OVERLOAD" will be
displayed and you cannot measure yourself.
a If you step on the scale platform before
"0.0" kg is displayed,
e
Displays such as , or , will
appear or the power will be switched off
during measurement.
-OL
-1.1ERROR
Points to Note
Use
Display
Front
Electrode
Heel
Electrode
After is displayed
kg will be displayed.
0.0
88888
1
Press the "WEIGHT only/OFF"
Button.(A short beep will sound.)
To Measure Body weight alone
Button
WEIGHT only/OFF
2
Start measurement.
Your "Body Weight" will
be displayed.
Step off the scale
platform.
kg will be displayed
again and the power will be
switched off.
0.0
Step on the weighing
platform carefully
after kg is
displayed.
0.0
GB
GB
a
In the following cases the measurement may be lost.
(If necessary record important measurements in a notebook).
©When the equipment has been used continuously in
the wrong way.
©When the equipment is subjected to static electricity
or electrical noise.
©When malfunctions related to the recording
mechanism occur.
* Please note the manufacturer accepts no responsibility for damage caused by
loss and changes to the recorded data.
* Please note the manufacturer accepts no responsibility for any damage, lost
profits or any claims by a third party arising from the use of this equipment.
"SELECT YOUR NO."
will be displayed
and the
Memory Key will
blink.
Personal
Remarks
a
If "NO DATA" is displayed,
e
Measurements were
not recorded at the
time to which the
cursor is pointing.
(This is not a malfunction.)
aThe displayed figures are weekly and monthly
averages.
aWhen you want to end the graph display function,
ePress button.
eIf you do not operate the equipment for about 30
seconds, the power will automatically switch off.
(Automatic power off function)
WEIGHT only/OFF
Measurements are recorded in the display box.
Recorded data can still be checked even if the display box
is separated from the weighing platform. Use this feature
if you need to consuit with professionals in sports clubs or
medical facilities.
Convenient Use
2
3
To display past measurements
Displaying Measurements.
kg
%
Move the cursor from the current to the past by
pressing
(By pressing you
can move
the cursor from the
past to the current
measurement.)
U
Press "SET"
(While pressed, the
figure at the cursor
position is displayed.)
* Day Area:
-1 ~ -6 is displayed.
Week Area:
-1 ~ -12 is displayed.
Month Area:
Year and month
(e.g. 99-1) are displayed.
Graph Display Function
18
The equipment can record results for a maximum of 5 years, and display them as graphs. (This function is not available for individuals
whth no pre-set data, or who only measure their body weight).
1
Displaying graphs.
e. g. When you want to display the graph registered
against the Memory Key 3.
Personal
With the display
clear.
press
U
Press your
Memory
Key.
(In this case, press 3.)
Personal
Display
Memory Key
(for five individuals)
Personal
"GRAPH" Button
By pressing the
"Time/DOWN" button
you can move the cursor.
"Time/DOWN" Button
"UP" Button
"SET" Button
BF-562海外GB+D面付解除 ページ19