Tanita BF-562 Scale User Manual


 
GB
GB
Highlight the part you want to
change.
(In this case the "Year.")
Change the figure by pressing
and set it by pressing
(The next item starts to flash.)
by pressing
("SET DATE" and "PRESS OR
" will be displayed.)
After the year, month and
day are displayed, "SET
TIME" and "PRESS
OR
" will be displayed
(as right).
press to
display the calendar.
While nothing is displayed,
Press
3
Finish changing
the calendar.
1
Display the calendar.
How to Change the Calendar
Changing the calendar settings
2
Change the calendar.
e.g. In the case of changing the "Day".
Display
SET Button
UP Button
Time/DOWN Button
GRAPH Button
U
U
U
U
U
U
or
Highlight the calendar.
U
U
or
Highlight the clock by pressing
UU
by pressing
or
Highlight the month.
U
U
Highlight the hour by pressing
"Minute" by pressing
Press to set the calendar.
Highlight the
UU
press again to finalize
the calendar.
(After flashing, the display will
disappear.)
The calendar has been
changed.
After "PRESS SET" flashes,
continuously,
or
By pressing
UU
The display will show as the
diagram(right).
or
UU
Use
21
GB
GB
The body fat percentage
is being measured.
Them "ooooo" will appear
and disappear in succession,
Until the "Body Fat Percentage"
is displayed on the digital
display, move as little as
possible and stand straight.
First "your body weight"
will be displayed.
(A short beep will sound.)
be sure to stand on the
scale platform barefoot so
that your heels touch the
center of the electrodes.
After kg is displayed,
0.0
2
To Start Measuring.
Measurement is finished.
"your body weight" and the
"Body Fat Percentage" will
be displayed for about three
seconds. (Two short beeps
will sound.)
The BMI figure is displayed.
The unit will switch off.
Note:When measured in the
athlete-mode, the BMI figure
will not be displayed.
Press
While nothing is displayed,
1
To set your details for
personal data.
20
Guest Mode: Measuring without pre-set data
U
Following the display
instructions, record the
"
month
"
,
"
day
"
and
"
year
"
of
your
"
birth
"
,
and your
"gender" and "height".
See "Before Measurement
(Registration of Personal Data)" on
page 12 for details.
(Two short beeps will sound, then
"0.0 kg" will be displayed.)
Front
Electrode
Heel Electrode
Time/DOWN Button
UP Button
SET Button
Display
GRAPH Button
a
When you want to change the month, day, hour or minute,
please follow the same procedure as for the year.
aWhen you find you have made a mistake during
temporary registration,
ePlease press the button. Since this operation
takes you back to the month setting, please start again.
aWhen you want to quit while changing the calendar,
ePress button. The display will
disappear and the changes will be deleted.
WEIGHT only/OFF
GRAPH
Points to Note
a
Only change the calendar when necessary.
Please change the calendar only when the initial settings were
incorrect. If you change the calendar after that, the order of
the recorded measurement results may become mixed up.
Remarks
BF-562GB+D面付解除 ページ21