Filter
Top Products
050105 Rev. C
28
English
X. Troubleshooting
X. TROUBLESHOOTING
You will need to adjust your chair from time to time for best performance (especially if you
alter the original settings). This chart gives you a first solution, then a second and a third
if needed. You may need to look farther to find the best solution for a specific problem.
NOTE– To keep track of your progress, make only ONE change at a time.
✓✓✓✓ Make sure tire pressure is correct and equal in
both rear tires and front caster tires, if pneumatic.
✓✓✓✓ ✓Make sure all nuts and bolts are snug.
✓✓ Make sure all spokes and nipples are tight
on radial spoke wheels.
✓ Use Tri-Flow Lubricant (Teflon®-based) between
all modular frame connections and parts.
✓✓ ✓ ✓ Check for proper caster housing adjustment.
See instructions for caster adjustment.
✓ Check for proper toe-in/out adjustment.
See instructions for proper adjustment.
Left turn in chair
Right turn in chair
Looseness in chair
Sluggish turning
Squeaks and rattles
Caster flutter
Component slipping
out of alignment
SYMPTOMS
SOLUTIONS