Filter
Top Products
34F45 Issue 6
Fig. 50
Fig. 51
Batteries
The batteries are contained within a
box located under the seat. To
remove the batteries should they
require changing or maintenance,
first disconnect the 6 pin connector
then lift the rear handle and pull the
tray backwards. The tray will lock
tow thirds of the way out, (Fig. 50)
unplug the batteries connection
plug. We suggest you remove the
batteries one at a time as they are
heavy. To remove the battery tray
tilt the rear handle up, push the tray
forwards and unhook the tray from
the rear runners. To refit the tray
reverse the process.
You must ensure that the tray is
securely locked into place and
cannot slide back prior to use.
If it is not correctly fitted it
could cause your wheelchair to
be unstable on slopes.
Safety cut-outs
In the event of a short circuit there
are safety systems built into your
wheelchair to safeguard your
electrical circuits. Cut-outs (Fig. 51)
are positioned on the battery box
rear, and are 15 amp for the
controller and motors, they
automatically cut off the power.
Inspect the cut-out buttons and you
will see which has tripped by the
extension of the button. After a few
seconds push the button in to
resume. If a problem persists
contact your local Sunrise Medical
service dealer.
6 pin connector
Battery
connection
plug
Rear handle
Rear runners
Safety cut outs Battery box
Charging socket
Batteries and charging