Filter
Top Products
8F45 Issue 6
Preparing your wheelchair for use
Fig. 3
Fitting footrests
Firstly, offer the footrest assembly
at right angles to the frame
(Fig. 3b), locate the stem into the
frame tube and swing the assembly
forward as in Fig. 3a to lock in
position. To swing away the
footrest, simply depress the
retaining catch and turn the footrest
out. This can now be lifted out if
required.
Control pod slide
Control box
Fig 4a: Connect the power lead to
control box (Fig. 4a). The control
box is mounted on a sliding
mechanism which enables the
control to be moved forwards and
backwards. When the most
comfortable position has been
selected, secure the slider by
tightening the locking screw.
Ensure the locking screw is fully
tightened prior to use and
especially when transporting your
wheelchair.
Fig 4b: You can slide the control
along the rail and set as you wish.
To adjust the control arm rotate
handle, located under the rail to the
left. Turn to the right to fix the
position.
Locking screw
Fig.3a
Fig. 4a
Fig. 4b