Filter
Top Products
i
J
;
:
Display mark
Condition/Cause
Corrective action
v
Mark
ap’pears
in the mea- Measurement in progress -
surement condition and
remain quiet.
Measurement in flashes when pulse is
progress
detected.
I
7
Mark flashes when power is Automatic exhaust is
per-
applied and there is air formed.
I
remaining in the cuff.
Exhaust
--
A
Measurement has begun Raise
WcufT
but the pressure was
pressure 30-40
mmHg
Insufficient
insufficient.
more and measure once
pressure
again.
+s
Replace
batteries
Appears when the battery
Replace all four batteries
voltage is excessively tow.
with new ones.
/--
-
IZ
K/f’
fleasurement error
31
I/
/I,T,T
1-1
L
I-
K
/‘\
Pulse error
Appears when the blood
pressure could not be
obtained accurately.
Appears when the pulse
rate could not be obtained
accurately.
Exhaust the air from the
cuff, and re-apply the cuff
properly and re-measure.
(Wait 10 minutes before
re-measure)