Sterling Power Products Pearl Mobility Aid User Manual


 
22 Iss 2
Operating your Scooter
Braking
To bring the scooter to a standstill simply let go of the throttle control lever.
Remember to keep your hands on the handlebars whilst the scooter is
braking.
Two types of braking are used.
(a) Automatic regenerative braking, which slows the scooter to a stop.
(b) Automatic braking which will operate a couple of seconds after
releasing the control lever and holds the scooter in position, even if
you are on a hill.
Note: Automatic braking is not instantaneous and will engage
within 1/2 a wheel turn once the scooter has stopped.
Emergency Braking
In the unlikely event of an unwanted movement of the scooter, switching
off the On-Off switch will bring the scooter to a stop.
Though very effective, emergency braking is extremely abrupt and must
never be used under normal circumstances.
Letting go of the throttle lever will slow the scooter to a controlled stop.
Switching off
The scooter must always be switched off at the On-Off switch.
When the scooter is stowed or not in use for a long period of time, always
switch the battery pack off.