Sterling Power Products Pearl Mobility Aid User Manual


 
12 Iss 2
Safety warning and user guidance
Getting on to your scooter
1. Ensure that the on-off switch or key switch is turned to the off position.
2. Stand at the side of the scooter, facing forwards.
3. Pull the armrest upwards until vertical.
4. Make sure that the seat is secure, with the backrest upright.
5. Steady yourself with your right hand on the tiller and place your right foot
onto the floorboard.
6. Gently lower yourself into the seat.
7. Ensure that both feet are placed firmly on the floorboard of the scooter .
8. Pull the armrest downwards and allow it to gently settle back into
position.
Getting off your scooter
1. Bring your scooter to a complete stop.
2. Make sure that the on-off switch or key switch is turned to the off position.
3. Pull the armrest upwards until vertical.
4. Put your left foot on the ground gently steadying yourself.
5. Carefully get out of the seat and stand by the side of your scooter with
both feet on the ground.
6. You may leave the armrest in this position or return it to normal.