16 Iss 2
Seat Height Adjustment
The seat post is height-adjustable by firstly
removing the battery.
Fold down the armrests, backrest and lift the
seat off.
Remove the seat height adjustment pin. Move
the seat post to the desired position and re-
insert the seat height adjustment pin, (Photo 4).
Replace seat and check that all parts are
secure.
Use of mobile phones
Mobile telephones or two way
radio devices must not be used
while operating the vehicle.
Use of mobile phones or two
way radios can cause
excessively strong
electromagnetic fields. This may
interfere with the vehicles
electronic systems.
If mobile phones or mobile
radios are required to be used,
the vehicle must be brought to a
halt and the power turned off
before any such device is
switched on or used.
If you are in any doubt about
your ability to drive the
scooter due to any medical
condition or treatment, then
consult your doctor.
Safety warning and user guidance
Transportation (De-docking)
When transporting the scooter remove seat and
lower the tiller. The battery can be removed and
the rear end of scooter dismantled.
Always stow your scooter in the luggage
compartment of your vehicle.
Always ensure your scooter or scooter parts
are securely anchored when being
transported.
Do not sit on your scooter whilst it is being
transported in or on another vehicle.
Do not attempt to carry passengers on your
scooter.
Do not attempt to tow another vehicle.
Seat Swivel
To make it easy to get on and off of the
scooter, the seat can swivel 360º and lock into
4 positions. Simply lift the lever under the seat
and rotate the seat round.
Photo 4
Seat Pin