Filter
Top Products
17
Iss 4
Programmable Controller
In order to keep you safe, under
certain conditions your scoota
may either not let you drive, bring
you to a safe stop, or drive at a
reduced speed or power.
Note: The controller can be
programmed to alter the
maximum speed, rate of
acceleration and deceleration
and the rate of braking. This will
have an effect on driving
performance. This should only
be done by an authorised
Sunrise dealer as it is possible
to program the settings outside
of the safe parameters intended.
If the scooter stops or will not drive
the reason is normally indicated
by a flashing STATUS light on the
dash board.
If your scoota operates, but
seems to lack top speed and
power; this indicates a flat battery
and/or the controller has been
worked so hard it is very hot and
can not supply full power.
This will happen more frequently
and more quickly on hot days, in
hilly environments and with heavy
drivers.
This action is perfectly normal and
means the controller is working to
keep itself, the motor, the batteries
and you safe.