Filter
Top Products
26
www.pridemobility.com Sonic/RevA/May 2004
VI. BATTERIES AND CHARGING
BATTERY REPLACEMENT
Battery Removal
1. Remove the battery compartment lid. See figure 10.
2. Disconnect the battery harnesses. See figure 11.
3. Remove the battery pack from the scooter. See figure 11A.
4. Unzip the battery pack and remove the battery or batteries.
5. Disconnect the red (+) positive and black (-) negative battery leads from the battery terminals by pulling them
gently from the battery terminals. See figure 12.
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
Battery Replacement
1. Connect the two (2) battery leads to the new battery terminals. See figure 12.
n Red lead to (+) positive terminal.
n Black lead to (-) negative terminal.
2. Put the battery or batteries back into the battery pack with the battery terminals facing up.
3. Zip the battery pack and place it back into the battery compartment.
4. Reconnect the battery harnesses.
5. Replace the battery compartment lid.
Figure 12. Battery Leads
Figure 10. Battery Compartment Lid
Figure 11. Battery Harness Removal
Figure 11A. Battery Pack Removal
BATTERY
TERMINAL
BATTERY LEADS
BATTERY
HARNESSES