Filter
Top Products
Switching on
Only when the scale is not loaded.
After the test routine, the display is set to zero.
The scale is ready for use.
Step onto the scales or sit on the scales.
The body weight appears in the display.
Setting to zero
Necessary when the display does not show zero,
when unloaded. Possible zero range -1 % ... +3 % of
the weighing range.
Tare weighing
Place a towel or similar on the scales. Press the
key. The scale is ready for net weighing.
Deleting tare weight
The display shows the
gross weight or 0.000 when unloaded
Switching off
This is immediately possible when the display is "0".
In other cases, depress the button for 3 seconds.
When the appliance is running off the mains power
supply, the message "Off" appears in the display.
Printer/IT
Sends the dataset to the printer or IT equipment.
Note
These functions are only executed when the scale is
at a standstill and up to 5 seconds after the key is
pressed.
18
ENGLISH