Soehnle 7701 Scale User Manual


 
17
ENGLISH
!
Installation and commissioning
The display unit is already mounted on the scale. If
necessary, use the supplied bracket to place it on a
table or fix it to the wall.
1. For table use, insert the rubber feet.
2. For wall use, fix the bracket to the wall approx.
110-150cm above the ground.
3. Insert the display unit into the bracket.
4. Connect the power supply ...
5. ... and/or insert (rechargeable) batteries (4 x 1.5V
AA). Then slacken the two screws on the left side
of the housing.
If the appliance is operated with the charge
adapter, only use rechargeable batteries.
Normal batteries will destroy the appliance.
6. Set up the scales at the point of application. Align
7700 and 7701 using a spirit level and ensure that
the appliance is horizontal.
7. Align the 7702 using the spirit level and the adju-
stable feet until it is horizontal. During the weighing
process, secure the appliance using the
thumbwheels on the adjustable feet. The scale is
ready for use.
The operating keys
On-Off
Zero position
Tare
Print
Function key (see Page 19)
Display symbols
Display is fixed to improve legibility.
Replace the batteries or charge the rechar-
geable batteries.
Zero message
Net weight
Piece mode
Active weighing area