Soehnle 7701 Scale User Manual


 
14
ENGLISH
!
These operating instructions are part of the appliance. They must always be kept close to the applian-
ce. Compliance with these operating instructions is mandatory in order to ensure the correct function
and operation of the appliance. If the appliance fails to function correctly, the appliance may be dama-
ged. The appliance must then be sent to an authorised service centre. Only genuine spare parts may
be used if an authorised service stations carries out repairs. Genuine spare parts are described in the
service documentation together with order numbers (see table for a list of spare part numbers).
Soehnle will only assume responsibility for the safety of the appliance if these instructions are obser-
ved and the appliance is operated in compliance with the operating instructions. The appliance is a
medical device and may only be used by persons who are capable of handling the appliance correctly
as a result of their training or their knowledge. Before using the appliance, the user must ensure that
the appliance is functional and in proper working order.
The operator must know how to operate the appliance. The appliance is not intended for use in medi-
cal rooms subject to explosion hazards.
Explosion-hazard areas may occur if flammable anaesthestics, skin cleansing agents and skin disin-
fectants are used.
Use of additional appliances
Only additional appliances (printer, computer) may be connected to the serial data port if they con-
form to European Standard EN 60601-1 or a suitable disconnecting device is connected in series.
Applicator
Only the applicator listed in the table may come into contact with the patient.
Maintenance and service
The measuring inspection test was performed during the initial calibration process in production.
Further regular measuring inspection tests (recalibration) must be carried out by the calibration authori-
ties responsible in compliance with national regulations. Repairs may only be carried out by a centre
authorised by Soehnle using genuine spare parts.
Cleaning
Before cleaning, disconnect the appliance from the mains by removing the power plug from the wall
socket. Only clean the appliance using a moist cloth. On no account may water be allowed to enter
into the appliance. Disinfectant may only be used on the membrane keyboard of the display and on
the applicator.
The following disinfectants are allowed: Methylated spirit, Isopropanol, 2% Kohrsolin; 1% aqueous
Sokrena solution; 5% Sagrotan; 5% Gigasept. It is prohibited to spray the appliance and power plug.
Before putting the appliance into use, please read with care the information given in the Operating
Instructions. They contain important instructions for installation, proper use and maintenance of the
appliance.
The manufacturer shall not be liable for damages arising out of failure to heed the following instruc-
tions:
When using electrical components under increased safety requirements, always comply with the
appropriate regulations. Never perform work on the appliance while the power is switched on.
Improper installation will render the warranty null and void. The mains power supply must be compati-
ble with the specifications printed on the appliance power supply. The appliance is dust-proof and
splash-proof in accordance with protection class IP 65. Please make sure that all seals are undama-
ged. When the appliance is running off the battery, close the power socket using the supplied rubber
cap.
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum
values specified in the applicable standards.