Filter
Top Products
4/27/2006
13
Both left and right sides must be in drive mode for power chair to
operate. Otherwise the Powerchair will flash fault code of 9 lights
and will not operate (VSI only). For the HD; if one side is in drive
mode & the other is in freewheel, the powerchair will spin in
circles.
Shoprider HD Drive/Freewheel Mechanism
The drive/freewheel levers are found toward the rear of the
Powerchair, one on top left and one bottom right. These levers will
allow you to disengage the drive mechanism and push the
Powerchair while in freewheel mode. (FIG. 5)
Shoprider WS Drive/Freewheel Mechanism
The drive/freewheel levers are found toward the front of the
Powerchair, one on each side, located at the end of each motor.
These levers will allow you to disengage the drive mechanism and
push the Powerchair while in freewheel mode. (FIG. 6)
Figure 5
Free Wheel Levers
Figure 6
Free Wheel Lever, NOTE:
There is another lever on
opposite side, same location