Filter
Top Products
13
Carbon 49 · USB/MIDI Keyboard Controller
VOLUME Fader
The VOLUME fader sends MIDI information to control the performance of the de-
vice that is connected to the keyboard. The factory setting is channel volume, but
can be assigned to another parameter in Edit Mode. Refer to the section Edit Mode
(p.14) for details.
DATA Knob
The DATA knob sends MIDI information to control the performance of the device
that is connected to the keyboard. The factory setting is pan control, but can be
assigned to another parameter in Edit Mode. Refer to the section Edit Mode (p.14)
for details.
PITCH BEND Wheel
The PITCH BEND wheel is used to bend notes played on the keyboard by raising or
lowering the pitch. The response and range of this controller is based on the patch
or sound source that is being controlled. The pitch bend wheel is spring-mounted
and will return to the center position when it is released.
SUSTAIN Pedal Input
You can connect a momentary footswitch or damper pedal to the rear panel SUS-
TAIN Pedal input. The default setting for the pedal input is sustain (CC #64). You can
assign another function to the pedal input in Edit Mode. Refer to the section Edit
Mode (p.14) for details.
When the keyboard is powered on, it will detect the polarity of a connected pedal.
To reverse the pedal’s polarity, press the pedal when powering on the keyboard.
Basic Operation