Filter
Top Products
4
PARTS OF THE MASK FITTING THE MASK
The MIRAGE NV FULL FACE MASK SERIES 2 is supplied
fully assembled.
Fitting the mask correctly is essential to optimum
therapy delivery. Use the ResMed Mask Fitting
Template to help you choose the best mask size for
your patient.
1 Connect the mask to the ventilator system by
following the ventilator system operating
instructions and/or physician’s prescription.
2 Seat the mask cushion over the patient’s nose and
mouth. On most patients, the bottom of the
cushion should rest below the lower lip and the top
of the cushion on the bridge of the nose, between
the eyes.
3 Pull the headgear over the patient’s head. Make
sure the side lower Velcro
®
straps pass below the
patient’s ears, and that the side upper Velcro straps
pass over their forehead.
Figure 1: Mask Parts
Mask
frame
Tapered
fitting
Luer lock
port cap/s
Mask
port
Mask
cushion
Cushion
clip
Top Velcro strap
Side
upper
Velcro
straps
Side lower
Velcro
straps
Quick
Release
Tab
Figure 2: Headgear