ResMed S8 ELITETM II Sleep Apnea Machine User Manual


 
2
Accessories available:
Integrated humidifier
Front cap
3 m air tubing
DC-12 converter
ResMed Tubing Wrap.
Masks
A list of masks (and their settings) compatible with these devices can be found on
www.resmed.com, on the Products page under Service and Support.
Humidifiers
A list of humidifiers compatible with ResMed devices can be found on
www.resmed.com, on the Products page under Service and Support.
Setting up the S8 Series II
!
WARNING
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
Only ResMed air tubing should be used with the device. A different type of
air tubing may alter the pressure you actually receive and reduce the
effectiveness of your treatment.
Blocking the hose and/or air inlet of the device while in operation could lead
to overheating of the device.
!
CAUTION
Be careful to place the device where it cannot be bumped, and where no one
will trip over the power cord.
If you put the device on the floor, make sure the area is free from dust and
clear of bedding, clothes or other objects that could block the air inlet.
Make sure the area around the device is dry and clean.
Carry handle
Screen
Keypad
Air outlet
DC
AC
Data Card
slot