Filter
Top Products
3
Step 3.
Screw in the 4 Threaded Rods into the 4 corners of the assembled gate. The Threaded
Rods do not need to be fully screwed in, final adjustments will be made before
completing installation.
Step 4.
Use the Paper Wall Mounting Template to help you mark the exact locations to attache
the Maxi Mounting Brackets
To use the Paper Wall Mounting Template, place it against the wall with the bottom
edge of the template touching the floor. You may choose to use a level or measuring
device to ensure exact placement.
Mark the location of the screw
holes of the Mounting Brackets
through the template and onto
the wall. Then, repeat the process
on the opposing side of the
opening or doorway.
Diagram B
Diagram C
Screw Holes