Filter
Top Products
2
Assembling and Installing Your Gate:
Step 1.
Determine the width of your doorway or opening.
For openings between 34” and 39”:
Remove and discard the protective end screws located at points X and Y in
Diagram A, then skip to Step 3.
For openings between 49” - 59” :
Proceed to Step 2.
Step 2.
Use the 4 Double Ended Screws to fasten the Extension Panel to the Main Gate Panel so
that the new gate configuration fits within your doorway or opening with 1”-5” of extra
space.
NOTE: You must use 2 sets of Double Ended Screws on top, and 2 sets of Double
Ended Screws on the bottom. See Diagram A
Diagram A