Filter
Top Products
To recall values from the LOG loop, do the following:
1. Release or unlock the trigger, if necessary.
2. Press the RECALL button. The RCL icon will be activated.
3. Press the RUN/LOG button, if necessary, so that the LOG icon is activated.
4. Read the recalled temperature from the display.
5. Press the ▲ or ▼ buttons (LOC mode) to recall values from other LOG locations.
RECALL contains two modes: LOC (location) and MAX (as shown in Figure 2-9). In
RECALL, the stored temperature and emissivity setting along with either the location
number or MAX temperature can be displayed for each of the 100 LOG locations.
2-18 Raynger 3i Series Operator’s Manual