Filter
Top Products
33
Sonic www.pridemobility.com
Frame Separation
1. Push back on the seat post to pivot the rear section backward until it is standing vertically on its end. See figure 23.
2. Lift the front section up until the lower pegs are no longer in the slots. See figure 24.
3. Carefully lift the front section vertically away from the rear section. See figure 25.
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figure 21.
2. Position the toggle latch buckle over the top of the toggle latch. See figure 22.
3. Lower the tiller to the scooter floorboard and fully tighten the tiller adjustment knob.
I X . DISASSEMBLY AND ASSEMBLY
Figure 22. Toggle Latch (Unlatched)
TOGGLE
LATCH
TOGGLE
LATCH
RELEASE
BUTTON
Figure 21. Toggle Latch (Latched)
TOGGLE
LATCH
BUCKLE
Figure 23. Frame Positioning Figure 24. Frame Lockup
PEGS
SLOTS
Figure 25. Frame Halves
TILLER HANDLE