Filter
Top Products
32
www.pridemobility.com Victory XL-4/RevC/June03
VIII. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
Your tiller is equipped with a tiller adjustment lever, which allows you to lock the tiller in place. See figure 14.
To adjust the tiller angle:
1. Turn the tiller adjustment lever counterclockwise until it is loose. If the tiller adjustment lever comes in
contact with the tiller basket, pull it outward, turn it clockwise, and release it. Continue to loosen until
you are able to move the tiller.
2. Turn the tiller adjustment lever clockwise until it is tight. If the tiller adjustment lever comes in contact
with the tiller basket, pull it outward, turn it counterclockwise, and release it. Continue to turn the lever
until it is tight.
NOTE: The tiller may be adjusted to its lowest position and locked in place for storage.
To adjust the tiller for storage:
1. Turn the tiller adjustment lever counterclockwise until it is loose.
2. Pull the tiller boot upward to expose the tiller release buttons.
3. Grasp the hand grip on the tiller and carefully depress both tiller release buttons, then slowly lower the
tiller to the scooters floorboard.
4. When the tiller reaches its lowest point, turn the tiller adjustment lever clockwise until it is tight to lock
the tiller in place.
Figure 14. Tiller Angle Adjustment
TILLER ADJUSTMENT LEVER
TILLER BOOT
WARNING! Remove the key from the key switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat while the scooter is in motion.