Filter
Top Products
23
Victory XL-4 /RevC/June03 www.pridemobility.com
V. YOUR VICTORY XL-4
Electronic Controller Module
This module is located behind the batteries and at the forward left corner of the rear section. The electronic
controller module receives electrical signals from the console controls and sends power to the motor, the
brakes, and the lighting system.
.
Motor/Transaxle Assembly
The motor/transaxle assembly is the geared transmission and differential. It is a one-piece, direct drive,
fully sealed assembly designed to provide quiet operation with maximum power and long life.
Manual Freewheel Lever
Whenever you want to push your scooter for short distances, you can put it in freewheel mode.
n The manual freewheel lever is located on the end of the motor/transaxle assembly at the right rear of the
scooter.
n Pull up on the manual freewheel lever to disable the drive system and the brake system; you will then be
able to push your scooter.
n Push down on the manual freewheel lever to reengage the drive system and the brake system and take
your scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
n Disengage the drive motors only on a level surface.
n Ensure the key is removed from the key switch.
n Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.
Anti-tip Wheels
The anti-tip wheels are an integral and important safety feature designed to help prevent your scooter from
tipping rearwards on an incline. They are bolted to the frame at the rearmost part of your scooter. See figure 9.
WARNING! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by Pride.