Filter
Top Products
23Shuttle
TILLER ANGLE ADJUSTMENT
You can adjust the tiller to three positions. The tiller
adjustment lever locks the tiller in place. See figure 10.
1. Squeeze the tiller lock lever.
2. Reposition the tiller to one of the three possible
settings. The tiller may be lowered to the center
of the floorboard and locked in place for storage.
See IX. Disassembly and Assembly.
3. Release the tiller lock lever.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different
heights in one-inch increments. See figure 11.
1. Pull the seat locking lever forward and remove
the seat. See IX. Disassembly and Assembly.
2. Remove the nut and bolt that fastens the seat lock-
ing mechanism to the seat post.
3. Align the seat locking mechanism with one of the
five holes on the seat post. Keep the second bush-
ing (up inside the lock assembly) in place.
4. Reinstall the bolt and nut into the locking mecha-
nism. Tighten snugly. Do not overtighten. This
may cause the lock to malfunction.
5. Reinstall the seat into the seat pedestal.
ELECTRIC SEAT HEIGHT
ADJUSTMENT (OPTIONAL)
1. Insert the key into the key switch.
2. Press the power seat toggle switch on the control
console assembly to the seat position.
3. Use the throttle control lever to raise or lower the
seat. Forward raises the seat. Reverse lowers the
seat.
SEAT ROTATION
The seat lock lever locks the seat in one of eight posi-
tions. See figure 11.
1. Pull up on the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely
in place.
FIGURE 11. SEAT HEIGHT ADJUSTMENT BOLT
SEAT LOCK LEVER
FIGURE 10. ADJUSTING THE TILLER ANGLE
VIII. COMFORT ADJUSTMENTS
WARNING! Remove the key before adjusting the tiller. Never attempt to adjust the tiller
while the shuttle is in motion.
TILLER ADJUSTMENT LEVER