Filter
Top Products
26 www.pridemobility.com Jazzy 1107
V. COMFORT ADJUSTMENTS
To change the armrest width:
1. Locate the armrest knob on each side of the armrest receiver
bracket. See figure 18.
2. Loosen each knob.
3. Slide the armrests in or out to the desired width.
4. Tighten each knob.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to the
floor. See figure 18.
2. Loosen the jam nuts.
3. Turn the armrest angle adjusting screw clockwise to raise the
front of the armrest, or counterclockwise to lower the front of
the armrest.
4. Tighten the jam nuts to lock the armrest angle adjusting screw
into place.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot platform
bracket. See figure 19.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot platform
bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot platform
bracket. See figure 19.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot platform
bracket and tighten.
Quick Release Fasteners
The foot platform is attached to the power base with two
quick release fasteners. See figure 19. Each quick release
fastener consists of a bolt, a lever, and a nut. See figure 20.
The lever has a cam on the end that allows it to clamp into
place. The quick release fastener has two states: clamped
and unclamped. When the lever is open, the quick release
fastener is unclamped. When the lever is closed, the quick
release fastener is clamped.
Figure 19. Foot Platform Adjustment
FOOT
PLATFORM
BRACKET
QUICK RELEASE
FASTENERS
Figure 20. Quick Release Fastener Operation
LEVER (OPEN)
UNCLAMPED
BOLT
NUT
CAM
LEVER (FULLY CLOSED)
CLAMPED