Filter
Top Products
25Hurricane PMV
IX. DISASSEMBLY AND ASSEMBLY
9. Unplug both battery harnesses and lift both batter-
ies off of the Hurricane PMV. See figures 17 and
18.
CAUTION! Failure to unplug both
battery harnesses and the control
console harness prior to disassem-
bly could result in permanent dam-
age to the PMV.
10. Grab the handle grip on the tiller, pull upward on
the release lever, and gently lower the tiller down to
the center of the Hurricane PMV chassis until it is
fully lowered. See figure 9.
11. Remove the ball detent pins. See figure 19.
12. Lift the locking levers. See figure See figure 20.
13. Gently slide the front and rear sections apart. See
figure 21.
FIGURE 18. BATTERY INSTALLATION
FIGURE 19. BALL DETENT PIN
BALL DETENT PIN
FIGURE 20. FRAME LOCK LEVER
REAR SECTION
FRONT SECTION
FIGURE 21. FRONT AND REAR CHASSIS SECTIONS
UNLOCKED POSITION
SEAT PEDESTAL