Filter
Top Products
21
Outlander Series www.pridemobility.com
VI. CARE AND MAINTENANCE
General Cleaning Guidelines
The lift system can be hand washed along with the vehicle with soap and water. However, automatic drive-
through car washes should be avoided as they may interfere with and cause damage to the lift.
Wiring Harness
The wiring harness should be checked periodically for corrosion and/or decay. Contact your authorized
Pride Provider if the wiring harness needs to be replaced.
Lift Platform/Metal Components
Check the lift platform for wear or damage. Contact your authorized Pride Provider for repair or
replacement.
The lift platform surface may become slippery if exposed to moisture (ice, snow, rain, mist/spray
conditions, etc.). Use caution when loading/unloading a mobility device in these conditions and wipe
off any excess moisture from the lift platform.
Regularly inspect the metal lift components for scratches. Treat any problem areas with a rust inhibitor
or metal sealant.
If your lift system is exhibiting wear that you feel is questionable in any way, contact your authorized Pride
Provider immediately. Do not attempt to repair, adjust, or modify the manufacturer settings and materials.
Lift Removal
Raise platform to stowed position.
Disconnect power source.
Lubricate hitch mount bolt with WD-40 prior to removal.