Pride Mobility Outlander LP Mobility Aid User Manual


 
20
www.pridemobility.com Outlander Series
T-BAR INNER-TELESCOPING
TUBE
VI. CARE AND MAINTENANCE
CARE AND MAINTENANCE
Your lift system requires a minimal amount of care and
maintenance. If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule
inspection and maintenance at your authorized Pride Pro-
vider. The following areas require periodic inspection and/
or care and maintenance.
Daily Maintenance Schedule
This lift system may come equipped with any of the
securement devices listed below. Inspect these devices for
loose or damaged parts on a daily basis. Have your
authorized Pride Provider repair or replace any problem
parts before using the lift system.
Retractable Tie-down straps
Lock-down arms
Power dock
90-Day Maintenance Schedule
Clean and lubricate the T-bar inner telescoping tube.
Use all-weather lithium grease only. See figure 22.
Lubricate all pivot points on the lift. Use all weather
lithium grease only.
Inspect and clean the power-supply connections as
necessary.
Inspect all hardware and tighten or replace as
necessary.
Visually inspect lift system for loose or damaged
parts. Have your authorized Pride Provider repair or
replace any problem parts before using the lift sys-
tem.
Two-Year Maintenance Schedule
If your lift is equipped with a power dock, replace the
securment bolt in the securement bracket located on your
mobility device.
Five-Year Maintenance Schedule
Inspect the “Spring-Activated Mechanical Switch”
and lubricate or adjust spring tension as necessary.
See figure 23.
Figure 22. Lift Frame Maintenance
Figure 23. Spring-activated Mechanical Switch