Pride Mobility Jazzy 1103 Mobility Aid User Manual


 
Jazzy 1103 Rev L/Feb03 www.pridemobility.com 19
MANUAL FREEWHEEL LEVERS
For convenience, your Jazzy 1103 is equipped with two manual freewheel levers. See figure 2. These levers allow
you to disengage the drive motors and maneuver the chair manually.
To engage or disengage the drive motors:
1. Locate the two (2) metal levers protruding from the body shroud.
2. Turn them rearward to disengage the drive motors. See figure 5.
3. Turn them outward to engage the drive motors. See figure 6.
If the lever is difficult to move in either direction, slightly rock the Jazzy back and forth. The lever should then move
to the desired position.
CAUTION! It is important to remember that when your Jazzy is in freewheel mode, the braking
system is disengaged.
WARNING! Do not use the Jazzy while the drive motors are disengaged! Do not disengage the drive
motors when the Jazzy is on an incline, as the unit could roll on its own, causing injury!
Figure 6. Drive Mode (Drive Motor Engaged)
Figure 5. Freewheel Mode (Drive Motor Disengaged)
IV. THE JAZZY 1103