Filter
Top Products
28 www.pridemobility.com Stylus LS
APPENDIX I - SPECIFICATIONS
STYLUS LS SPECIFICATIONS
Seat Dimensions:
16 in. x 16 in., 16 in. x 18 in., 18 in x 16 in., 18 in. x 18 in., 20 in. x 16 in., 20 in. x 18 in.
Back Height: 17-19 in. (43.18-48.26 cm)
Seat Upholstery: Adjustable tension
Seat-to-Floor Height See figure 13.
Caster Wheels: 5 in. (12.70 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
Axle Mount: 3-position
Caster Fork: 3-position axle; short fork
Maximum Safe Slope: 5° (8.7%)
Turning Radius:
1
See figure 28.
Overall Size:
1
Length: See figure 28.
Width: See figure 28.
Weight Capacity: 250 lbs. (113.4 kg)
Component Weight: Base: 32.5 lbs. (14.74 kg) without front riggings
Armrests: Flip-back, desk-length; Height-adjustable, desk or full length
Front Riggings: Swing-away foot rests, Elevating leg rests
Wheel Locks: Push-to-lock or pull-to-lock
Frame Finish: Silver Vein
Accessories: Anti-tip wheels; oxygen tank holder; wheel lock extension
Static Stability Forward (Wheels Locked)
10°
Static Stability Rearward (Wheels Locked)
14° (without oxygen tank and holder); 13° (with oxygen tank and holder)
Wheel Lock Operational Force
2
Left: 60N Right: 60N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.
2
Test results for Stylus LS equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03. Max-
imum operating force for hand operated wheel locks is 60N (+ or – ) 10%. Operational force can vary based on tire type, manufac-
ture, and condition.
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.