Pride Mobility INFMANU4093 Wheelchair User Manual


 
Stylus LS www.pridemobility.com 11
Removable Parts
WARNING! Do not attempt to lift or move a wheelchair by any of its removable parts, including
the armrests, seat, and front riggings.
Reaching and Bending
Never reach, lean, or bend while driving your wheelchair. If it is absolutely necessary to reach, lean, or bend while
seated on your wheelchair, it is important to maintain a stable center of gravity and keep the wheelchair from
tipping. Pride recommends that the wheelchair user determine his/her personal limitations and practice bending
and reaching in the presence of a qualified healthcare professional.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
floor by reaching down between your knees or if you have to reach over the back of
the seat. Movements such as these may change your center of gravity and the weight
distribution of the wheelchair. This may cause your wheelchair to tip.
WARNING! Keep your hands away from the tires when driving. Be aware that loose
fitting clothing can become caught in drive tires.
Transfers
Transferring onto and off of your wheelchair requires
a good sense of balance. Always have an attendant or
healthcare professional present while learning to prop-
erly transfer yourself.
To eliminate the possibility of injury, Pride recom-
mends that you or a trained attendant perform the fol-
lowing tasks before attempting a transfer:
Turn both caster wheels so that the caster forks
point forward to improve wheelchair stability
during transfer.
Ensure both manual wheel locks on your
wheelchair are engaged. See III. “Your
Wheelchair.”
If necessary, remove or flip up one or both
armrests. See IV. “Comfort Adjustments.”
Move the leg rests aside; this will help to keep your
feet from getting caught on the front rigging during
the transfer.
Reduce the distance between your wheelchair and
the object you are transferring onto.
WARNING! Before transferring, position yourself as far back as possible in the wheelchair seat
to prevent the wheelchair from tipping forward during transfer.
WARNING! Avoid putting all of your weight on the wheelchair armrests and do not use the
armrests for weight bearing purposes, such as transfers. Such use may cause the wheelchair to
tip, resulting in a fall from the wheelchair and personal injury.
WARNING! Avoid putting all of your weight on the manual wheel locks and do not use the manual
wheel locks for weight bearing purposes, such as transfers. Such use may cause equipment
damage or personal injury.
WARNING! Avoid putting all of your weight on the front riggings. Such use may cause the
wheelchair to tip.
II. SAFETY
Figure 4. Ideal Transfer Position