Filter
Top Products
18 www.pridemobility.com Stylus LS
IV. COMFORT ADJUSTMENTS
Footrest/Leg Rest Removal
The Swing-away Footrests (SFR) and Elevating Leg
Rests (ELR) can be moved or removed to aid in trans-
fers or transporting your wheelchair.
To move the SFR or ELR to the side:
1. Push the release lever back. See figure 14 or 16.
2. Move the SFR or ELR aside.
3. Repeat for the other side if necessary.
To remove the SFR or ELR:
1. Push the release lever back. See figure 14 or 16.
2. Move the SFR or ELR to the side.
3. Pull the SFR or ELR up.
4. Repeat for the other side if necessary.
Swing-Away Footrest (SFR) Length
You can change the SFR length between 14-18 in.
(35.56-45.72 cm) in 1-in. (2.54-cm) increments. This
length is measured from the SFR foot plate to the top
of the SFR. See figure 15.
To change the SFR length:
1. Rotate the lock lever downward to the unlocked
position.
2. Adjust the SFR to the desired length while
squeezing the release pins.
3. Rotate the lock lever upward to the locked position.
4. Repeat for the other side.
Elevating Leg Rest (ELR) Length
You can change the ELR length between 15-19 in.
(38.1-48.26 cm). This length is measured from the ELR
foot plate to the top of the ELR. See figure 16.
To change the ELR length:
1. Loosen the bolt head on the underside of the ELR.
NOTE: You may need to tap the bold head to release
the wedge clamp.
2. Adjust the ELR to the desired length.
3. Tighten the bolt head.
4. Repeat the procedure for the other side.
Figure 15. SFR Length Adjustment
Figure 14. SFR Release
Figure 16. ELR Length Adjustment
BOLT HEAD
LOCK LEVER
RELEASE
LEVER
RELEASE PINS
RELEASE
LEVER