Filter
Top Products
Maxima
29
TILLER ANGLE ADJUSTMENT
is in motion.
You can adjust the tiller to any number of positions be-
tween the forward stop and the scooter deck.
1. Pull up on the tiller adjustment lever. See figure 13.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller remains
in that position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different heights.
1. Remove the seat from your Maxima. See IX. Dis-
assembly and Assembly.
2. Use the attached ring to pull and remove the ball de-
tent pin from the seat post tower. See figure 14.
3. Raise or lower the seat pedestal to the desired height.
4. Hold the seat pedestal at that height and match up the
holes in the seat pedestal and in the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
FRONT-TO-BACK SEAT ADJUSTMENT
You can change the seat position forward or backward.
1. Remove the seat.
2. Use a 7/16-in. wrench to remove the seat position ad-
justment screws. See figure 15.
3. Reposition the seat base on the seat and reinstall the
seat position adjustment screws.
4. Reinstall the seat.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Push down on the seat lock lever to unlock the seat.
See figure 15.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely
in place.
NOTE: In order to lower the tiller to the scooter deck,
you must first remove the seat and both batteries.
BALL DETENT PIN
SEAT PEDESTAL
VIII. COMFORT ADJUSTMENTS
FIGURE 13. TILLER ADJUSTMENT
TILLER ADJUSTMENT LEVER
FIGURE 14. SEAT HEIGHT ADJUSTMENT
FIGURE 15. SEAT ADJUSTMENTS
ARMREST ADJUSTMENT KNOBS
SEAT LOCK LEVER
SEAT POSITION
ADJUSTMENT
SCREWS
SEAT
SEAT
BASE
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the scooter is in motion.