Filter
Top Products
RealPresence
®
Practitioner Cart
®
8000
Manufactured by: Rubbermaid Healthcare • 16905 Northcross Drive • Suite 200 • Huntersville NC 28078
Polycom RealPresence® Practitioner Cart® 8000 User Manual p/n 1793149 Rev C 03/13
15
PLACE BATTERY BACK INTO CART
a. With the bottom of the battery facing
the cart, slide the battery into the
cart. The terminal ends should be
pointing out towards the back of the
cart.
CONNECT BATTERY LEADS TO BATTERY
WARNING: Always connect the Red (+)
terminal first. Do not allow any metal objects or
tools to contact a terminal and other metal parts
(including the other battery terminal) at the same
time.
a. Fasten Red Connector (+) Terminal
using terminal bolt. A harmless
spark may occur when connector
touches terminal. Quickly tap
connector to terminal to diminish
effect.
b. Cover terminal bolt with protective
red boot.
c. Fasten Black Connector to black (-)
Terminal using terminal bolt.
d. Cover terminal bolt with protective
black boot. Tuck the excess battery
cables into the battery cavity.
e. Place Battery Access Panel back on
cart and tighten fasteners with Allen
key.
f. Reconnect power cord to Battery
Access Panel
CHECK BATTERY LEVEL AND CHARGE
a. Plug unit into wall
b. The control keypad display will
indicate the battery charge level, or
the battery indicator bars will scroll to
indicate that the battery is charging.
c. The battery is fully charged, when
the charge level bars, located inside
the battery icon, stop scrolling.
..
.
LEAD
BATTERY
MUST BE
RECYCLED
c
a
b
e