Filter
Top Products
RealPresence
®
Practitioner Cart
®
8000
Manufactured by: Rubbermaid Healthcare • 16905 Northcross Drive • Suite 200 • Huntersville NC 28078
Polycom RealPresence® Practitioner Cart® 8000 User Manual p/n 1793149 Rev C 03/13
8
Practitioner Cart POWER UP
With the system completely turned off, press the
Power button on the Control Keypad.
The keypad LCD will light up, the controller will
beep.
All devices integrated into the Practitioner Cart will
automatically turn on and boot up.
If on-off switch is pressed, it will power off entire
cart, even in battery mode. In combination with a
low speed of movement, continuous activation of
moving switch, very low stopping distances- there
is no need to have an additional emergency
switch.
MONITOR.
a. The power indicator will illuminate.
b. The generic logo will flash until a
video signal is sent to the monitor
input.
NOTE: Initially the monitor may
identify no signal until the HDX 8000
boots up to a certain point.
CAMERA
a. Initially the camera will spin from left
to right, then to center.
b. The camera image is not displayed
until the HDX 8000 is fully booted.
HDX 8000
a. A blue light will illuminate. NOTE:
The Technology cabinet will have to
be unlocked and opened to see light.
b. Initial Polycom splash screen will
appear along with series of green
LED lights. This signifies that the
HDX 8000 is booting up.
Upon complete boot up, the display will show the
HDX 8000 Home screen.
As long as the data patch cord has been plugged
into the custom I/O data plate, the Practitioner
Cart will be fully operational, upon completion of
initial setup (completed first time Practitioner Cart
is turned on and set up).
HDX 8000 HARDWARE AND
ACCESORIES
HDX 8000
High definition Voice, Video & Content
Flexible audio and video inputs/outputs
Polycom EagleEye Camera
True high definition image capture
Enhanced image quality in all calls, not
just HD
12x zoom
180 degree panning radius
Quick, sharp focus when using the
manual pan/tilt/zoom or preset camera
locations.
Multi-Function Remote Control
Controls features and functions of the
HDX series systems
Uses four (4) AAA batteries (included)
Omni-directional HDX Microphone Array
360 degree coverage
22 kHz high fidelity audio
PLACING, ANSWERING, AND
ENDING CALLS
To Answer an Incoming Call