Filter
Top Products
10
CHAPTER 2: USING YOUR INTEGRA™ 5 SCALE
Certain options are password-protected for supervisory control. They
are: Configure Scale and BMC Intra ZIP. You can access these options
by pressing the Setup key and selecting Supervisor Setup.
After selecting Supervisor Setup, at the Enter Password prompt:
1. Enter the supervisor password, M G R, on the color-coded and
alphanumeric keys from left to right as shown.
2. Press Enter. Menu options Exit, Configure Scale, and BMC Intra
ZIP display. See the chart below for definitions of Configure Scale
and BMC Intra ZIP. Pressing Exit returns you to the User Setup
screen.
Note: Pressing Exit
while in a supervisor
option returns you
to the previous
screen.
Supervisor Setup Option Description
Configure Scale
Install Scale Used to enter a ZIP Code during the
installation process to establish the scale's
geographic location.
Other Language When on, prompts display in Spanish.
Inscriptions When on, allows you to include an inscription
in the meter imprint.
Accounting When on, communicates with connected mail
data system about account data. When off,
communicates with connected meter about
account data.
Vibration Filter Turn on this option only in areas of excessive
vibration to aid the display of stable weight.
BMC Intra ZIP
Create Intra ZIP Used to enter ranges of ZIP Code locations
within a bulk mailing center.
3. Select the desired options and respond to the prompts.
4. When finished, select Exit twice to exit the supervisor and user
setup menus.
5. Select Save or Cancel to save or cancel your changes and return to
the ready screen.
Green
Green Red
→
→→→→
Entering the Supervisor
Password