Philips QT4060 Electric Shaver User Manual


 
Do not use the appliance when the cutting unit is damaged or
broken, as this may cause injury.
Do not use a damaged powerplug.
If the powerplug is damaged, always have it replaced by one of the
original type in order to avoid a hazard.
Make sure the appliance and the powerplug do not get wet.
Keep the appliance out of the reach of children.
Use, charge and store the appliance at a temperature between
15cC and 35cC.
This appliance is only intended for trimming the human beard. Do
not use it for any other purpose.
Charging
Charge the appliance fully before you start using it for the first time or
after a long period of disuse.
1 Make sure the appliance is switched off before you start charging
it.
2 Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
The charging light goes on to indicate that the appliance is
charging (fig. 2).
It will take approx. 10 hours to fully charge the battery.
A fully charged appliance has a cordless trimming time of up to
50 minutes.
B
When the appliance has been charged for the first time, we advise you
to use it until the battery is completely empty.
B
For a single trimming session the appliance must be charged for at
least 90 minutes.
Optimising the lifetime of the rechargeable battery.
- After the appliance has been charged for the first time, use it until
the battery is completely empty.
- Do not charge the appliance for more than 24 hours.
- Do not keep the powerplug plugged into the wall socket all the
time.
ENGLISH 7