Filter
Top Products
ENGLISH 11
minutes left indicator words.The spark symbol will
start blinking.This display shows an increase in
shaving minutes from 0 to 100.
C - The Block(s) Display:
As soon as you connect the charging plug to an
electrical outlet, the display goes on.The min./max.
indication appears as well as the plug symbol.The
spark symbol starts blinking.The display shows an
increase in blocks (from red block to max).
C ◗ Full Charge Indicator
When batteries have been fully charged,“FULL”
scrolls every 9 seconds across the display
together with plug symbol.
C ◗ Used Shaving Time
When you switch the shaver off, the number of
used shaving minutes appears on the display.The
words ‘mins used’ is displayed and the word ‘used’
blinks.
C ◗ Minutes Left Indicator
- The Numeric Display:
The number on the display shows remaining
shaving time in minutes.
C - The Block(s) Display:
The height of the blocks shows the remaining
shaving time.
ENGLISH10
Easy Read LED Display
C ◗ Polymer LED Display
Allows you to choose the display mode you
personally prefer.There are two display modes to
choose from: a numeric or block(s) display.
C 1 To select your personal display press the
ON/OFF button for about 5 seconds.The
numeric display will appear along with the
replacement head symbol,cleaning, and
plug indicators.
C 2 If you prefer the block display, continuously
press and release the ON/OFF button
until you visibly see the display you desire.
You will hear a beep to confirm your
personal choice. Changing your display
selection is always possible.
NOTE:For first time use of the razor, or after
non-use for one month, you may need to press
for several minutes before the display appears!
The display provides the following
information:
When you turn the razor ON or OFF the display
will come on for approximately 10 seconds.
C ◗ Charging Indicator
- The Numeric Display:
As soon as you connect the charging plug to an
electrical outlet, the display goes on.The “0”
appears as well as the plug symbol and the
8894_95XLDFUwspanish.qxd 5/28/04 10:21 AM Page 10