Filter
Top Products
15
2 Press the razor head release button and open the razor
head assembly.
3 Turn the wheel counterclockwise and remove the
retaining frame.
4 Remove and clean one set at a time.
5 Separate the cutter from the head and rinse clean under
hot water.
Do not clean the razor heads with the brush.
Do not clean more than one cutter and head at a time,
since they are all matching sets. If you accidentally
interchange the cutters and heads,it could take several
weeks before optimal shaving performance is restored.
6 Replace the set back into the Head Assembly in such a
way that the sides with the little holes point to the
middle of the shaving unit.
Make sure that the two pointy edges of the head fit
exactly into the recesses.
7 Repeat the process for the other two sets of razor heads.
8 Replace the frame.
8845XL Spectra 11/8/01 12:40 PM Page 15
Downloaded from www.Manualslib.com manuals search engine