Filter
Top Products
11
1 Connect cord to razor. Connect the charging plug into
any 100V to 240V AC outlet. Use only the charging plug
provided.The right green LED Light will light up to indicate
razor is (re)charging and will blink when fully charged.
An adaptor plug may be necessary for charging plug usage
in some foreign countries. Use an attachment plug adaptor
of the proper configuration for the power outlet.Your
charging plug will automatically convert to work on 100V
to 240V AC Systems.
Do not charge razor in pouch.
2 First time charging and recharging after non-use for
1 month or more requires a full 4 hours.
When batteries are fully charged, the right green LED
Light will blink.
Recharging
1
First time charging requires 4 hours. After initial charge,
recharging requires approximately 1 hour.
2 When razor is fully charged,disconnect the charging plug from
outlet. Do not keep razor permanently plugged into outlet.
Quick Charge
When batteries are totally depleted, recharging the razor
for approximately 6 minutes gives enough energy for a
3 minute cordless shave.
PUT IT TO THE TEST & SHAVING TIPS
21 Day Trial and Conversion Process. It is a fact that
your skin and beard need time to adjust to a new
shaving system.
Use your new razor exclusively for 3 weeks to fully
enjoy the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to
adjust.
Invest 3 weeks and you'll soon experience the full joy of
your new razor.
8845XL Spectra 11/8/01 12:40 PM Page 11
Downloaded from www.Manualslib.com manuals search engine