Filter
Top Products
ENGLISH 13ENGLISH12
Charging Razor with a Cord
C 1 Connect cord directly to razor and connect
the charging plug into any 100V to 240V AC
outlet. Use only the charging plug provided.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C ◗ As you charge razor, the green Charging
Indicator light will light up to indicate razor is
(re)charging.
2 Charging and recharging requires a full
8 hours. A fully charged razor has a
cordless shaving time of up to 10 days.
◗ Do not leave the razor continuously plugged
into outlet charging as it would reduce the life
of batteries. Remove the plug from outlet as
soon as the razor is fully charged.
LED Charging Indicator
C ◗ LED Charging Indicator Light
The green Charging Indicator Light will light up
to indicate razor is (re)charging.
Before First Use
◗ Charge the razor before you start using it
(see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
◗ Only use the power plug or Jet Clean System
provided to charge the razor.
◗ The charging plug converts 100 – 240V AC to
less than 24V DC.
Charging
◗ Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
◗ Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
◗ Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
◗ You may also shave using the cord provided.
This razor will not recharge while being used
corded.
◗ Do not charge/recharge or use razor corded
until fully dried.