Filter
Top Products
16
17
ENGLISH
◗ A fully charged razor has a shaving time of up
to 65 minutes.
◗ You may recharge when the recharge
indicators appear on the razor.
◗ Do not charge/recharge or use razor until
fully dried.
Charging in the Power Pod
C
1 Connect the small plug of cord to power
pod. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
◗ An adaptor plug may be necessary for power
cord usage in some foreign countries. Use
an attachment plug adaptor of the proper
configuration for the power outlet.
The power cord will automatically convert to
work on 100V to 240V AC systems.
C
2 Lift the top of the power pod lid (1) and
remove (2).
C
3 Remove protective razor head cap from
razor.
The razor will not fit in the power pod with the
protective razor head cap on razor.
ENGLISH
C
4 Insert the top of the razor into the power
pod (1) and then press the bottom part
into the power pod (2).
5 The display on the razor will indicate razor
is charging.
6 Charging requires one full hour. A fully
charged razor has a cordless shaving time
of up to 21 days.
Charging in the Charging Stand
1 Connect the small plug of cord to charging
stand. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
◗ An adaptor plug may be necessary for power
cord usage in some foreign countries. Use
an attachment plug adaptor of the proper
configuration for the power outlet.
The power cord will automatically convert to
work on 100V to 240V AC systems.
C
2 Place razor in stand in an upright position.
Press the razor tightly into the holder
making sure the charging contacts on each
side of the razor fit into the holder. If
razor has been placed correctly, you will
hear a beep (Model 1090X only).