Filter
Top Products
PELCO Manual C222M-A (8/95) 1
INSTALLATION/OPERATION MANUAL
MR3050
UNIVERSAL MONITOR MOUNT
2.0 SCOPE
The information contained within this manual covers
the MR3050 Universal Monitor Mount.
3.0 DESCRIPTION
The MR3050 is a universal monitor mount engineered
to safely mount a monitor from either a ceiling or a
wall. This mount was designed for use in security
systems, educational institutions, churches, hospitals,
and other applications requiring flexibility in monitor
mounting and positioning.
The MR3050 is an adjustable mount designed for use
with 14-19" (35.56-48.26 cm) monitors. Two optional
adapters are available for this mount: the MRWA for
wall mounting and the MRCA for ceiling mounting.
An 8" (20.32 cm) length of 1-1/2" NPT pipe is provided
with the mount.
3.1 RECOMMENDED MOUNTS
MRWA Wall mount, uses six (6), 5/16" diameter
fasteners (not supplied)
MRCA Ceiling mount, uses four (4), 5/16" diam-
eter fasteners (not supplied)
1.0 WARNINGS
Prior to installation and use of this product, the following
WARNINGS should be observed.
1. Installation and servicing should only be done by
Qualified Service Personnel and conform to all
Local codes.
2. Installation shall be done in accordance with all
local and national electrical and mechanical codes
utilizing only approved materials.
3. Use only installation methods and materials ca-
pable of supporting four (4) times the maximum
specified load.
4. Use stainless steel hardware to fasten the mount to
outdoor surfaces.
5. To prevent damage from water leakage when in-
stalling a mount outdoors on a roof or wall, apply
sealant around the bolt holes between the mount
and mounting surface.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.