Filter
Top Products
10
English
7. Dry the outer foil section and
the shaver completely.
8. Attach the outer foil section to
the shaver.
Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn the shaver
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
the shaver. This may cause the shaver to turn off or enter turbo
mode.
•
•
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the OFF/ON switch for more than 30 seconds to delete .
system outer foil once every year
inner blade once every two years
Replacing the system outer foil
1. Press the foil frame release
buttons and lift the outer foil
section upwards as illustrated.
2. Press the system outer foil
release buttons and pull down
the system outer foil as
illustrated.
3. Align the foil frame mark
and the system outer foil
mark and securely attach
together.
The system outer foil cannot
be reversely attached.
Always insert the system
outer foil to the foil frame
when attaching to the shaver.
4. After turning the mark to
the front, securely attach the
outer foil section to the shaver
until it clicks.
•
•
2 3
•
ES-LA93_USA.indb 10 2009/06/08 11:12:42