Filter
Top Products
5
English
Charging with the self-cleaning recharger
Charge
Thoroughly wipe off any drops of water on or around the recharger so that it is dry before charging it.
2
3
4
5
6
1
1
Attach the detergent
cartridge and the
water tank to the
self-cleaning
recharger.
Page 7
2
2
Insert the appliance
plug.
3
3
Plug in the adaptor.
4
4
Pull up the arm until it
clicks.
5
5
Remove the protective
cap
and then attach
the shaver.
Turn the shaver off before
attaching.
Check that the outer foil is not
deformed or damaged when you
are attaching the shaver.
6
6
Push down the arm
until it clicks.
glows and charging starts.
Charging is completed when the
indicators on the LCD panel
blinks.
(Max. 1 hour later)
•
•
•
•
You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
If the shape of the plug does not fit the power outlet, use
an attachment plug adaptor of the proper configuration.
•
•
Charging without the self-cleaning recharger
You can also charge without the
recharger.
1. Insert the appliance plug into the
shaver.
2. Plug in the adaptor into a
household outlet.
1
ES7109_USA.indb 5 2007/07/12 12:56:24