Filter
Top Products
4
English
Parts identification
s
t
a
t
u
s
charge
d
ry
clean
select
Protective cap
System outer foil
3 System outer foil release
buttons
4 Foil frame
5 Inner blades
6 Foil frame release buttons
7 Switch lock button
8 OFF/ON switch
9 LCD panel
Appliance socket
Trimmer
Trimmer handle
Adaptor (RE7-40)
Power cord
Appliance plug
Self-cleaning recharger
(Referred to as the
“Recharger”.)
Detergent cartridge
Water tank
Socket
Arm
Water tank cap
Clean lamp
Dry lamp
Charge lamp
Status lamp
Select button
Cleaning tray
Water level
Operating environment for the self-cleaning
recharger
Operating temperature: 0-40 °C (32-104 °F)
Operating humidity: Less than 95%
If you use the self-cleaning recharger in temperatures outside the
above range, the following problems may occur.
The time it takes to charge the shaver increases.
The recharger stops functioning.
The lifespan of the rechargeable battery shortens. (Only when
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
If the plug symbol does not glow initially when the shaver is
plugged in, wait for a short while until it does.
Depending on the environment, the shaver may not dry even if
you select a course that includes the “Dry” function. In this case,
wipe off any drops of water with a dry cloth.
•
-
-
-
•
•
ES7109_USA.indb 4 2007/07/12 12:56:23